Ball (Royal) Python
3-4 feet. Have grown as large as 5 feet
* Females will grow larger than males
Warm side - 85-90 degrees F
Basking - 90 degrees F
Cool side - 75 degrees F
* If room temperature falls below 75 degrees F at night, a supplemental infrared or ceramic heat fixture may be necessary.
50% ***May need moist box for shedding time
Most ball pythons purchased at pet stores and from good breeders in the U.S. are bred and hatched in captivity. To help reduce the number of snakes poached from the wild; do make sure your pet is indeed captive bred. The “ball python” name comes from the manner in which they curl up into a ball when they are nervous. They will carefully place their heads in the middle of this tight ball for protection. The ball python species is originally from the forests of Central and Western Africa, and they enjoy both the ground and trees (semi-arboreal). In Europe they are known as “Royal Pythons”
Ball pythons have flat heads and a square snout. They have 100-150 teeth that curve inward, which allow them to hold onto their prey. Normal color ball pythons have black striping on their heads and irregular brown spots on their bodies called “lobes”. “Pits” on the fronts of their face, formed by special scales, allow the snake to sense changes in heat as finite as 3/1000th of a degree. Ball pythons can also see extremely well in darkness. These features allow them to find prey in dimly lit environments. Both males and females have small claw-like “anal spurs” near the end of their tails. These are thought to be the evolutionary remainders of hind legs.
NORMAL BEHAVIOR & INTERACTION:
Nocturnal (most active at night) however they do not mind out-of-cage time during the day. Ball pythons are calm and usually non-aggressive, very curious, and like to explore in and out of the cage.
NOTE: All snakes should be housed separately and apart from other snakes, even those of the same species. Housing snakes together will create a dominant/submissive hierarchy and will result in one snake becoming stressed to the point of illness, anorexia and possibly death. It is also quite possible for a larger snake to eat a smaller snake!.
Carnivorous; frozen thawed mice or rats (size depending on age and size of snake) DO NOT FEED LIVE PREY (see “Snake Feeding” hand-out). Live prey may bite and injure your snake and consequently make your snake afraid of his own food. Live rodents may also harbor parasites that can be transferred to your snake.
FEEDING & SHEDDING:
Feed in the morning or in the evening. Ball Pythons will eat mice and rats in captivity, although they would not in the wild. In the wild they prefer birds, other snakes, frogs and lizards. They are constrictors; which means they constrict their prey to suffocate it and then eat it. If you have trouble feeding your ball python, please refer to our “Snake Feeding” fact sheet for help. A healthy snake will usually eat about every 7-10 days. An adult will eat from 3 adult mice to two medium rats at each feeding, depending on the size of the snake. Remember that it is always easier for a reptile to digest several smaller prey items rather that one large one. Defecation usually follows 2-3 days after eating. Do not feed again until snake has defecated from previous feeding. Some snake owners find it easier to feed their pet in a separate enclosure, free of bedding and furniture. This way you can be sure your snake eats all its food properly and the snake will not pick up any bedding when grabbing prey and mistakenly ingest it along with the prey.
*Do not handle your snake for 24 hours after eating to prevent regurgitation.
Depending on the snake’s age and size, he or she may shed 2-6 times a year. Young snakes shed more often than older snakes; smaller ones more than larger. The process of shedding takes about 7-10 days. When shedding is about to occur, the belly will become pink and the skin’s overall color will dull. After 5-6 days, it will clear and the snake will soon begin to shed. If the shed does not come off in one piece, it is a sign that its environment is not ideal (add more humidity).
In the wild, reptiles have a much easier time with their sheds, as they are generally in a more naturally humid environment and have access to pools or bodies of water in which they can soak at will. Even reptiles from arid areas find humid places to go during the shedding process, such as cold, moist burrows under the sand or caves. The shedding process happens when the snake’s body begins to grow a new layer of skin; that new layer begins to separate from the old and a very thin layer of fluid forms between the two layers. If your pet’s enclosure is too dry, this fluid layer will not form properly, making it difficult for your reptile to shed properly.
To create more humidity, the entire tank can be lightly spray misted twice a day during shedding time. Spray once in the morning and once later in the day. Make sure the later spray dries completely before lights go off for the night. Some snakes may benefit from a ‘moist box’ during shedding time. This can be a Tupperware-like container (with the cover on) containing a bed of moist reptile terrarium moss. The container should be big enough for the entire snake to be inside with an entry door cut in the side just large enough for the snake to come and go at will. Keep the moss moist but not watery, and place the box on the heating pad in the tank..
Snakes benefit greatly from a good deep-water soak at least once a week. A Tupperware container makes a good snake bathtub. Fill the container deep enough so the entire snake’s body can be submerged under water, but the snake’s head can be out of water. The water should be nice and warm (about 68-70 degrees). Soak your snake for about a half hour at a time.
Supplementation is not normally necessary for snakes as they consume whole prey. If your snake becomes ill, your veterinarian may recommend injecting the prey with supplements that can help the current issue. Do not inject your rodents without consulting your veterinarian first. Over-supplementation is possible and dangerous.
A large bowl of clean fresh chlorine-free water must always be available. Place it on the cool side of your snake’s enclosure. Change it daily, or as needed, as your pet will most likely bathe in it as well. Snakes will often defecate in their water bowl, as the warm water seems to have a laxative effect on reptiles! All water given to reptiles for drinking, as well as water used for misting, soaking or bathing must be 100% free of chlorine and heavy metals. (Not all home water filtration systems remove 100% of the chlorine and heavy metals from tap water). We recommend that you use unflavored bottled drinking water or bottled natural spring water; never use untreated tap water. If tap water is used, you should treat it with a de-chlorinating treatment. De-chlorinator is available in the pet store fish department. If you do not want to chemically de-chlorinate the water, you can leave an open container of tap water out for at least 24 hours. The chlorine will naturally dissipate.
Do not use distilled water, which can cause severe medical problems, since it lacks minerals that are essential to important body functions.
A daily misting or two with chlorine-free water will also be appreciated. However, care should be taken not to allow the enclosure to become damp. Also, do not mist less than two hours before turning the heat lamps off for the day..
- 40 breeder reptile tank (36x18) with very secure mesh top. 20 L (20x13) tank is acceptable for baby snakes.
- Light dome and basking bulb (Lg. dome and 100 watt bulb for 36x18 tank, 75 watt for a 20L (20x23) tank)
- Under tank reptile heater - placed under same side of tank as basking light. NO heat rocks.
- Temperature / humidity gauge - do not stick to side of tank. It should be moved around to check the temps of different parts of the cage.
- Dry hidey house Moist/humid hidey house for shedding time.
- Shredded aspen bedding, newspaper or paper towels for the bottom of the tank.
- Large crock water bowl - big enough to soak in.
- Moist box (with reptile moss) for shedding time.
- Ball Python Book
HOUSING & ENVIRONMENT:
Snakes are ectothermic, or cold-blooded, which means they are dependent on the temperature of their immediate environment to regulate their body temperature. Therefore, we must create an environment with several heat gradients - warm on one end and cool on the other. With this set-up, your pet can go to either end depending on whether he needs to be warmer or cooler.
ENCLOSURE SIZE:The enclosure should be a solid glass sided tank long enough to create the two separate temperature gradients (warm and cool); a ball python tank should be at least 30-40 gallons or larger for an adult ball python and at least 20L for a baby.
IT IS NOT TRUE THAT A REPTILE WILL ONLY GROW AS LARGE AS ITS ENCLOSURE!!!!
COVER: Make sure the cage has an escape-proof metal mesh top. It should fit snugly onto the tank and have strong clips locking it on. It is important that the top is METAL mesh, as you will place the heat lamp directly on top of this cover.
HEAT PAD: Reptile heat pads can be adhered directly onto the underside of the glass bottom of the tank. Stick it on the glass on one of the very far ends of the tank. For safety reasons, make sure to attach the rubber feet (contained in the box) at all four corners of the underside of the tank. This will allow air to circulate underneath the tank and prevent the heat from being trapped under the tank.
NOTE: DO NOT use reptile heat rocks. They heat unevenly and have caused severe thermal burns in reptiles. Heat pads specifically manufactured for reptiles are safe for pets to be in contact with and are safe to leave on 24 hours a day.
HEAT LAMP: Place the heat dome with the basking bulb on top of the cage directly over where the reptile heat pad has been placed on the underside of one end of the tank.
NOTE!!: Follow directions carefully with all products - READ THE INSTRUCTION SHEET!! Always choose fixtures with ceramic sockets and be careful to choose the socket that is properly rated for the wattage bulb that you will be using. Do not place the fixtures by dry wood or flammable fabrics. All heaters should be placed out of the reach of children and all pets - including cats and dogs. Be very careful to make sure that your caged pet cannot reach and touch the heating device (bulb) in its own cage. A thermal burn to the face or body can be painful and life threatening..
HIDE HOUSE: Place a hide house inside the cage directly over where you have positioned the heat pad, and directly under the heat lamp above.
UVB LIGHT: Exposure to UVB (ultraviolet B) light is critical in allowing an animal to synthesize vitamin D3 in their skin and metabolize calcium in their body. If an animal is not exposed to an adequate level of UVB light, it will gradually develop physical problems from the result of mineral deficiencies such as low blood calcium (hypocalcaemia), soft eggs (females), stunted growth and metabolic bone disorder, which can be fatal if left untreated. In addition, recent studies have linked sub-optimal vitamin D levels with poor immune system function. All day-active (diurnal) indoor reptiles, amphibians, birds and hermit crabs should be allowed self-selected exposure to UVB lighting for up to 8-12 hours a day. This means they should be able to bask in the light but also get away if desired, much as they might in the wild. Many twilight-active (crepuscular) and night-active (nocturnal) species do get some exposure to the sun and may also benefit from low levels of UVB, which helps regulate their photoperiod and vitamin D levels as well. Please see our additional “UVB Lighting for Companion Birds and Reptiles” for specific instructions for your particular pet and the UVB bulb that we recommend for him or her.
HIDING HOUSE: Place a hide house inside the cage directly over where you have positioned the heat pad, and directly under the heat lamp above.
WATER BOWL: The large water crock can be placed on the opposite end of the cage, along with another hide house, if desired.
SUBSTRATE: We recommend a shredded aspen bedding since it will not cause impactions in the snake if it is ingested by mistake and it is easy to clean - daily spot cleaning becomes easy by just removing the soiled portion of aspen. Newspaper or paper towels can also be used. If “reptile carpeting” is used, it MUST be kept extremely clean. The carpeting can foster the growth of bacteria and fungus, which can in turn be very dangerous to your pet. If you insist on using the carpet, purchase two so you can interchange them regularly.
BRANCHES & PLANTS: Ball pythons do enjoy climbing, so sturdy climbing branches can be included as well.
TEMPERATURES: Cage temperatures should be monitored daily and kept at the temperatures listed at the top of this page. Use your reptile thermometer to check the temperatures in different places in the cage regularly to make sure they continually match the listed proper temperatures. * If the room temperature falls below 75 degrees at night, a supplemental infrared or ceramic heat fixture may be necessary. (These fixtures do not emit a light spectrum that is visible to the snake, so it will not disturb him at night, but they WILL provide the necessary supplemental heat.) If your snake does not receive the proper heat at the proper temperatures, he may become sick with issues such as respiratory disease and will probably stop eating, as snakes cannot digest their food without proper heat.
DAY/NIGHT LIGHT CYCLES AND HEATING:
All reptiles must have distinct day and night periods in their enclosure to maintain their biological rhythms. Ball Pythons need 8-12 hours of daytime and 8-12 hours of nighttime. However, as the daylight hours change seasonally outside, daylight hours inside the tank should reflect the same.
The day period must be light, and the night period must be dark.
A timer should be used to set day/night periods so the lights turn on and off automatically.
Daily maintenance should consist of spot cleaning by removing soiled substrate, cleaning water bowl thoroughly and wiping glass clean.
The entire tank should be cleaned thoroughly at least once every couple months with:
- A mild dishwashing liquid (a weak dilution) in warm water, THEN
- Vinegar & water (1:8) OR bleach and warm water (1:32)
- Cage “furniture” should also be scrubbed clean with the same dilution.
- RINSE OFF ALL SOAP AND BLEACH THOROUGHLY WITH PLAIN WATER BEFORE RE-INTRODUCING YOUR PET TO ITS ENCLOSURE!!
- NEVER MIX VINEGAR AND BLEACH - IT CREATES A TOXIC SOLUTION
GROOMING & HYGIENE:
To reduce the risk of contracting and spreading salmonella poisoning, all handlers should wash their hands after handling any reptile.
SIGNS OF A HEALTHY ANIMAL:
Smooth, even scales; no traces of mites (small, reddish brown spots around pits and nostrils, under scales); clear, bright eyes; rounded, full body; strong, even, smooth jaw line; regular record of healthy feeding and defecating schedule. It is very important to keep a journal for each animal that records feeding, refusals, defecation, shedding, unusual behavior, changes in behavior and dates of bulb changes. This will help your veterinarian trouble-shoot any health issues.
We recommend physical exams every year or two years with an exotic pet veterinarian for pet reptiles and amphibians. If your vet sees your pet regularly, many common conditions that afflict pet reptiles and amphibians can be caught and treated early. If not caught early enough or if left untreated, many of these conditions can become far worse if not fatal..
SIGNS OF ILLNESS:
Irregular scales; small reddish brown spots (mites) around mouth, pits, eye area, ear area or under scales; irregular jaw line, ‘dents’ in mouth with (or without) cottage cheese-like material (mouth rot); cloudy eyes or dull colored body when not in a shed; thinned body; irregular feeding and defecating habits. Limp, thin body, lethargy, sunken eyes, pinkish patches or spots on belly or sides; obvious bite marks or wounds from cage mate or prey. Red, fluid filled patches may indicate thermal burns or blister disease. For most conditions, see your exotic pet veterinarian, who can properly address and treat your pet.
SOME COMMON PROBLEMS INCLUDE:
- Mites: Symptoms include small reddish-brown spots around eyes, pits, mouth & under scales. For treatment, see exotic pet veterinarian. Parasite will be identified and proper treatment administered.
- Mouth rot: Symptoms include soft, dented mouth & jaw line. Cottage cheese-like material in mouth. For treatment, see exotic pet veterinarian for proper therapy and medications.
- IBD(Inclusion Body Disease): Symptoms include lethargy (snake stops eating and defecating); loses muscle tone; regurgitation; head tremors; disorientation; knotting; flipping on back. There is no known cure, however, see your exotic pet veterinarian for ‘quality of life’ supportive care.
- Eye caps: Eyes are cloudy while snake is not in shed. Sometimes happens after a shed when eye caps do not come off along with the shed. To treat, see exotic pet veterinarian. Heat and humidity in enclosure must be optimized.
©2012 Dawn M. Trainor-Scalise Courtesy of: Specialized Care for Avian & Exotic Pet In conjunction with Pet Supplies Plus 10882 Main Street, Clarence, NY 14031 Ph (716) 759-0144 www.buffalobirdnerd.com